Calibration Oil
GRADES:VG 2, 5
Calibration Oil
Introduction of Calibration Oil :
Calibrating Oil 2, 5 are simulated fuels with properties similar to diesel fuel. These specially developed fluids are not only safer to use, but are formulated to meet tighter, more demanding specifications required in the manufacturing processes used by the fuel system component manufacturers when building fuel pumps, fuel injectors and fuel, air and oil filters. These fluids contain a range of special additives to enhance corrosion resistance, oxidation stability and anti-wear. Calibrating oil are more suitable than commercially refined fuels for use in manufacturing processes due to the precisely controlled viscosity, density, higher & safer flash points and lower aromatic hydrocarbon content.
Application of Calibration Oil:
calibrating oil 2, 5 are recommended for the calibration of fuel pumps, fuel injectors and fuel, air and oil filters.
Performance Level of Calibration Oil:

Meets the performance level of ISO: 4113

TYPICAL PROPERTIES Calibration Fluid 2 Calibration Fluid 5
Kinematic Viscosity at 40°C., cSt, 2.45 - 2. 75 5. 0 - 6. 0
Flash Point, °C. (PMCC), 75 Min. 130 Min.
Pour Point, °C. Max. (-) 6 Max. (-) 6 Max.
Packing of Calibration Oil:

210 Litres Drum.

 

Date of issue: DKG/21.11.2008

DISCLAIMER: The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control.

Quality/Policy

 

Technical Support

 

Our Prouduct Range

 

Highlights