Banner Banner Banner Banner
Conkut Oil CL
GRADES: CONKUT CL :
Conkut Oil CL
Introduction of Conkut CL :
Conkut CL is a translucent type of emulsion with water having the advantage of visibility of work piece and tool during machining. This special purpose soluble cutting oil contains special additives for rust and corrosion inhibitors with biocides to prevent the bacterial growth in the emulsion. The oil has excellent cooling and lubricating properties which impart good surface finish and ensures the long tool life.
Application of Conkut Cl :
Conkut CL is suitable for variety of cutting operations of ferrous and non-ferrous metals where emulsifiable oil are normally used. The oil is normally used in the concentration of 5 to 10 % depending on the severity of machining.
Performance Level of Conkut Cl :
Conkut CL meets the requirements of IS-1115-1986 (Re-affirmed   1991).
Typical Properties of Conkut CL :
CHAR TYPICAL PROPERTIES ACTERISTICS
Conkut CL
Kinematic Viscosity at 40°C., cSt, 200
Flash Point, COC,°C 150
Frothing Test Passes
Emulsion Test Passes
Packing of High Vaccum Grease :

1 kg, 2 kg, 5 kg, 20kg, 50 kg.

 

Date Of Issue: 01.09.2009.

PDS No. 60590.

DISCLAIMER: The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control.

Quality/Policy

 

Technical Support

 

Our Prouduct Range

 

Highlights