Banner Banner Banner Banner
High Temperature Grease
GRADES : HITEMP & HITEMP EXTRA
High Temperature Grease
Introduction of High Temperature Grease :
These are non-soap base smooth structured grease for high temperature grease operating conditions under severe shock load conditions. High temperature grease are water resistant and are not affected by acids / alkalis. They have high mechanical stability for long life and protection against rust. High Temperature Grease Extra contains molybdenum disulphide for extra load.
Application of High Temperature Grease :
High Temperature Grease is recommended for plain bearings, anti – friction bearings operating at high temperature (120°C to 250°C). High Temperature Grease is recommended for highly loaded machinery operating at above high temperatures.
Performance Level of High Temperature Grease :
High Temperature Grease & High Temperature Extra Grease meet IS 12790: 1990.
Typical Properties of High Temperature Grease :
CHARACTERISTICS High Temperature Grease
HITEMP HITEMP EXTRA
Colour Brown Greenish Black
Worked Penetration at 25°C. 265 to 295 265 to 295
Drop Point °C, Min. Above 280 Above 280
Copper Corrosion Test at 100ºC for 3 hours. Passes Passes
Packing of High Temperature Grease :

182 Kgs.Drums.

 

Date of issue: 01.07.2009

PDS No. 60530 -60531.

DISCLAIMER: The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control.

Quality/Policy

 

Technical Support

 

Our Prouduct Range

 

Highlights