Banner Banner Banner Banner
Glass Mould Oil
GRADES: VG 10, 15 and 22
Glass Mould Oil
Introduction of Glass Mould Oil :
Glass Mould Oil are non-graphite type glass mould oil used for de-moulding in glass moulding industry. Glass Mould Oil are blended from highly refined base oil and specially selected additives. They provide instant de-moulding performance with good surface finish to the moulded products without any colouration of the glasses. They are non-toxic and do not cause fuming during use with unique property of inherent lubricity, low evaporation loss and moderately high fire points.
Application of Glass Mould Oil :
Glass Mould Oil can be applied by spraying or with swab and are recommended for different glassware and glass bottles etc.
Performance Level of Glass Mould Oil :
Glass Mould Oil meet IS: 12927 - 1990 (RA 2004) (Nongraphite type).
Typical Properties of Glass Mould Oil :
VG 10 VG 15 VG 22
Kinematic Viscosity @ 40°C, cSt. 9.0 to 11.0 14.0 to 16.0 20.0 to 24.0
Viscosity Index, Min. 2.0 3.0 4.0
Flash Point, °C, COC, Min. 110 130 150
Pour Point, °C, Max. 3 3 3
Packing of Glass Mould Oil :

210 Litres Drums.


Date of Issue :01.09.2009

PDS No. 30200 - 30202

DISCLAIMER: The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control.



Technical Support


Our Prouduct Range