Banner Banner Banner Banner
Rubber Process Oil
GRADES: RUBBER PROCESS OIL P, 32, 68, 220 and 460
Rubber Process Oil
Introduction of Rubber Process Oil:
Rubber Process Oil P 32, 68, 220 and 460 are predominantly paraffinic type rubber process oil and are blended from selected highly solvent refined base stocks of low sulphur content and with high viscosity index and low evaporation loss. These light coloured oil are having good colour stability during long storage.
Application of Rubber Process Oil:
Rubber Process Oil P 32, 68, 220 and 460 are used in the manufacture of various rubber oil products from both natural as well as synthetic rubber are preferred by the manufacturers of automotive rubber tubes based on synthetic rubber such as butyl / ethylene propylene rubber.
Performance Level of Rubber Process Oil:
Rubber Process Oil P 32, 68, 220 and 460 are ASTM 104 Type oil.
TYPICAL PROPERTIES
Rubber Process Oil P, 32 Rubber Process Oil P, 68 Rubber Process Oil P, 220 Rubber Process Oil P, 460
Kinematic Viscosity @ 40°C, cSt. 30 - 34 66 - 70 210 - 240 440 - 480
Viscosity Index, Min. 190 200 220 250
Flash Point, °C, COC, Min. 98 100 105 210
Pour Point, °C, Max. -3 -3 -3 -3
Packing of Rubber Process Oil:

210 Litres Drums and Bulk.

 

Date of issue : DKG/13-10-2008.

DISCLAIMER: The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control.

Quality/Policy

 

Technical Support

 

Our Prouduct Range

 

Highlights