Banner Banner Banner Banner
 
Aluminium Rolling Oil 80 and 110
GRADES: Aluminium Rolling Oil 80 & 110
Aluminium Rolling Oil 80 and 110
Introduction of Aluminium Rolling Oil 80 And 110 :
Aluminium Rolling Oil 80 & 110 are premium quality, low viscosity straight mineral oil specially developed for cold rolling oil operation of aluminium sheets, strip or oil. Their narrow boiling ranges and high IBP reduce the rate of evaporation which brings down the consumption of oil (Roll Oil Coolant) considerably. The inherent oiliness property reduces the friction to a greater extent and helps the metal reduction without any slippage. Rolling Oil is non-staining, noncorrosive and has good additive solubility for fats and alcohols which are added by the manufacturers of aluminium rolling oil for the advantage of smooth productions.
Application of Aluminium Rolling Oil 80 And 110 :
Aluminium Rolling Oil 80 & 110 are recommended for cold rolling of aluminium sheets, strip or foils.
Performance Level of Aluminium Rolling Oil 80 And 110 :
Aluminium Rolling Oil 80 & 110 meets the requirement of IS 14385 - 1996.
Typical Properties of Aluminium Rolling Oil 80 And 110 :
CHARACTERISTICS Aluminium Rolling Oil
Aluminium Rolling Oil 80 Aluminium Rolling Oil 110
Kinematic Viscosity @ 40°C, cSt. 1.50 - 2.10 1.80 - 2.30
Flash Point, °C. (COC), Min. 105 110
TAN, mg KOH / gm. 0.002 0.002
Distillation Range, 
a) IBP 
b) FBP
210 
250
240 
280
Packing of Aluminium Rolling Oil 80 And 110 :

210 Litres Drums.

 

Date of issue: 01.07.2009.

PDS No. 30600 - 30601.

DISCLAIMER: The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control.

Quality/Policy

 

Technical Support

 

Our Prouduct Range

 

Highlights