Banner Banner Banner Banner
EDM Oil
GRADES: 2, 3 & 4
EDM Oil
Description of EDM Oil :
Electric Discharge Machining Oil is a metal removal process involving the removal of material from the work piece by a series of controlled electric discharges or sparks. The tool and the work piece are insulated by a special dielectric fluid. These fluid are formulated with a highly refined, narrow cut paraffinic base stock with excellent oxidation stability which helps reduce the formation of oxidation products that will alter the dielectric strength of the fluid. The product is colourless and virtually odourless. The product exhibits a relatively high flash point that helps to reduce the possibility of fire. The low viscosity of the fluid provides good circulation through the spark gap and more rapid removal and settling of metal fines.
Application of EDM Oil :
Recommended for use in: Dielectric fluid in finish-cut electrical discharge (spark erosion) machining operations. Electrical discharge machining in tool and die shops, and in manufacture of electronics,extrusions, air-craft components, hardware, tools, fasteners, silver-ware, cutlery,jewellery, appliances, valves and regulators. Grinding fluid in glass grinding operations.
Typical Properties of EDM Oil :
CHARACTERISTICS EDM Oil
     
Grades 2 3 4
Colour Colourless Colourless Colourless
Kinematic Viscosity at 40°C, cSt 2.0 – 3.0 3.0 – 4.0 4.0 – 5.0
Flash Point, PMCC, °C, Min. 107 108 130
DI-electric Strength, KVA. 45 45 45
Packing of EDM Oil :

210 Litres M.S. Barrels, 50 Litres, 20 Litres

 

Date of issue: 01.07.2009

PDS No. 50800 -50801

DISCLAIMER: The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control.

Quality/Policy

 

Technical Support

 

Our Prouduct Range

 

Highlights