Banner Banner Banner Banner
Neat Cutting Oil 611
GRADES: VG 12
Neat Cutting Oil 611
Introduction of Neat Cutting Oil 611 :
Neat Cutting Oil 611 contains specially selected fatty material and active sulphur to impart extra ability of cutting operations under continuous and long working periods. Neat Cutting Oil 611 has minimum tendency of mist forming and increases the life of filter due to low tendency of sludge formation.
Application of Neat Cutting Oil 611 :
Neat Cutting Oil 611 is recommended for deep hole boring and drilling including gun drilling operations where easy swarf removal and effective cooling at the cutting point are required. Neat Cutting Oil 611 is not recommended for use on non-ferrous metals.
Performance Level of Neat Cutting Oil 611 :
Neat Cutting Oil 611 Proprietary
Typical Properties of Neat Cutting Oil 611 :
TYPICAL PROPERTIES
Neat Cutting Oil 611
Kinematic Viscosity at 40°C., cSt 10-12
Flash Point, °C. (COC) 130
Copper Strip Corrosion, 3 Hrs / 100°C. 4
Sap Value, mg KOH / gm. 14
Packing of Neat Cutting Oil 611 :

210 Litres Drum.

 

Date of issue: DKG/01.8.8.2009

DISCLAIMER: The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control.
1
2
3
4
5
6
7
8
9
10
11

Quality/Policy

 

Technical Support

 

Our Prouduct Range

 

Highlights