Banner Banner Banner Banner
Neat Cutting Oil 932
GRADES: VG 32
Neat Cutting Oil 932
Introduction of Neat Cutting Oil 932 :
Neat Cutting Oil 932 contains active and non-active sulphur, fatty oil and chlorinated additives to give better surface finish and longer cutting tool life over a wide range of operating temperatures by providing an excellent lubricating film.
Application of Neat Cutting Oil 932 :
Neat Cutting Oil 932 is recommended for machining operations of gear cutting, broaching and threading of alloy and stainless steels. The product is not recommended for use on non-ferrous metals.
Performance Level of Neat Cutting Oil 932 :
Easto Neat Cutting Oil 932 meets the requirement of IS 3065-1985, TYPE III, Grade 2 (RE-AFFIRMD 1995)
Typical Properties of Neat Cutting Oil 932 :
TYPICAL PROPERTIES
Neat Cutting Oil 932
Kinematic Viscosity at 40°C., cSt 34 - 40
Flash Point, °C. (COC) 160
Copper Strip Corrosion, 3 Hrs / 100°C. 4
Sap Value, mg KOH / gm. 10
Packing of Neat Cutting Oil 932 :

210 Litres Drum.

 

Date of issue: DKG/ 8-Aug-09.

DISCLAIMER: The information given here is considered to be correct & is offered for your consideration, investigation & verification. No Warranties are expressed or implied, since the use of products are beyond our control.
1
2
3
4
5
6
7
8
9
10
11

Quality/Policy

 

Technical Support

 

Our Prouduct Range

 

Highlights